Technical Training

2020-21 Training Enrollment

Courses

Scroll down to view the registration form.

GE Lightspeed/Brightspeed Series

Beginner

Students completing GE ACT course will be able to maintain system operational readiness to OEM specifications. This will include the ability to perform in depth troubleshooting enabling isolation of faults to field replaceable units. Upon identification of faulty units, students will have the capability to replace, run system calibration and diagnostics following replacement, and return the system to the end user fully operational. Majority of this class is in laboratory troubleshooting and repair.

Upcoming Course Dates:

  • March 22 – 26, 2021

View GE Lightspeed/Brightspeed Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience
  • Preferred one-year field experience in the area of computed tomography
Beginner

Students completing GE VCT course will be able to maintain system operational readiness to OEM specifications. This will include the ability to perform operations of the system, preventive maintenance, and advanced troubleshooting abilities enabling isolation of faults to field replaceable units. Upon identification of faulty units, students will have the capability to replace, run system calibration and diagnostics following replacement, and return the system to the end user fully operational.

Upcoming Course Dates:

  • May 3-7, 2021
  • September 20-24, 2021

View GE VCT Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience
  • Preferred one-year field experience in the area of computed tomography

GE Optima 540, 560, 660

Beginner

Students completing GE Optima 540, 560, 660 CT course will be able to maintain system operational readiness to OEM specifications. This will include the ability to perform operations of the system, preventive maintenance, and advanced troubleshooting abilities enabling isolation of faults to field replaceable units. Upon identification of faulty units, students will have the capability to replace, run system calibration and diagnostics following replacement, and return the system to the end user fully operational.

Upcoming Course Dates:

  • April 19-23, 2021
  • July 26-30, 2021
  • November 8-12, 2021

View GE Optima CT Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience
  • Preferred one-year field experience in the area of computed tomography

Introduction to CT

Beginner

Students completing Introduction to CT will be productive 1st call CT technicians familiar with all functionality, regulations, maintenance and basic troubleshooting capabilities.

Upcoming Course Dates:

  • February 17-19, 2021
  • May 12-14, 2021

View Intro to CT Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience

  • Preferred one-year field experience in the area of radiology/fluoroscopy

Advanced GE CT

Advanced

Students completing GE ACT course will be able to maintain system operational readiness to OEM specifications. This will include the ability to perform in depth troubleshooting enabling isolation of faults to field replaceable units. Upon identification of faulty units, students will have the capability to replace, run system calibration and diagnostics following replacement, and return the system to the end user fully operational. Majority of this class is in laboratory troubleshooting and repair.

Upcoming Course Dates:

  • February 22-26, 2021
  • July 19-23, 2021
  • November 1-5, 2021

View GE ACT Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience
  • Three years field experience in the area of computed tomography, specifically GE CT

BMET to Imaging (Phase 1-2 Combined)

Beginner

Students completing the BMET to Imaging 1 course will be productive 1st call imaging technicians familiar with multiple modalities, regulations, maintenance and basic troubleshooting capabilities.

Upcoming Course Dates:

  • January 11 –  22, 2021
  • March 1 – 12, 2021
  • May 17 – 28, 2021
  • August 2 – 13, 2021
  • October 18-29, 2021

View BMET to Imaging 1 Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience
  • Completion of provided online course material prior to arrival at facility

BMET to Imaging 2 (Phase 3-4 Combined)

Advanced

Students completing BMET to Imaging 2 will be productive imaging engineers capable of performing duties associated with repair, maintenance, and calibration of advanced fluoroscopic imaging systems. 

Upcoming Course Dates:

  • February 1-12, 2021
  • March 22-April 2, 2021
  • August 23-September 3, 2021

View BMET to Imaging 2 Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience
  • Completion of Tri-Imaging Solutions BMET to Imaging 1 or course equivalent

Toshiba Aquilion (16, 32, 64)

Beginner

Students completing Toshiba Aquilion Series course will be able to maintain system operational readiness to OEM specifications. This will include the ability to perform operations of the system, preventive maintenance, and advanced troubleshooting abilities enabling isolation of faults to field replaceable units. Upon identification of faulty units, students will have the capability to replace, run system calibration and diagnostics following replacement, and return the system to the end user fully operational.

Upcoming Course Dates:

  • June 14-18, 2021
  • September 13-17, 2021
  • December 6-10, 2021

View Toshiba Aquilion (16, 32, 64) Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience:
  • Preferred one-year field experience in the area of computed tomography

Toshiba Aquilion (Prime, Premium, One)

Beginner

Students completing Toshiba Prime, Premium, and One Series course will be able to maintain system operational readiness to OEM specifications. This will include the ability to perform operations of the system, preventive maintenance, and advanced troubleshooting abilities enabling isolation of faults to field replaceable units. Upon identification of faulty units, students will have the capability to replace, run system calibration and diagnostics following replacement, and return the system to the end user fully operational.

Upcoming Course Dates:

  • March 29- April 2, 2021
  • November 15-19, 2021

View Toshiba PPO Syllabus

Prerequisites:

  • Two-year electronics degree or equivalent experience

  • Preferred one-year field experience in the area of computed tomography

Apprentice Program

Beginner

For more information on our Apprentice Program and course outline, please click here.

Siemens Definition AS

Beginner

Tri-Imaging Solutions’ Definition AS Training Course is a 5-day (Monday – Friday) knowledge and skills development course designed for field service and support personnel. During this course, students engage in discussions, lectures and labs centered on the core principles of operation, configuration, troubleshooting and repair for all primary system components.

Upcoming Course Dates:

  • March 1-5, 2021
  • June 14-18, 2021
  • September 13-17, 2021

View Definition AS Syllabus

Prerequisites (It is highly recommended that interested students have the following Knowledge/Experience;

  • Completion of a Radiation Safety Training
  • 2 or more years of industry/military experience working with CT equipment — OR —
  • Attendance of an OEM’s Introduction to CT or CT Basics course (Certificates may be requested)

Siemens Sensation

Beginner

Tri-Imaging Solutions’ Sensation  Training Course is a 5-day (Monday – Friday) knowledge and skills development course designed for field service and support personnel. During this course, students engage in discussions, lectures and labs centered on the core principles of operation, configuration, troubleshooting and repair for all primary system components.

Upcoming Course Dates:

  • March 15-19, 2021
  • June 28-July 2, 2021
  • October 11-15, 2021

View Sensation Syllabus

Prerequisites (It is highly recommended that interested students have the following Knowledge/Experience;

  • Completion of a Radiation Safety Training
  • 2 or more years of industry/military experience working with CT equipment — OR —
  • Attendance of an OEM’s Introduction to CT or CT Basics course (Certificates may be requested)